Magnetic stripe laying equipment
Automatic magnetic stripe laying machine
This automatic magnetic tape laying machine is typically designed for laying magnetic strips onto card sheet materials. The pressure and heat are used in magnetic tape laying process, the temperature of laying rollers is independently controlled for an optimal laying result.
Finished Cards Sample
-
1．Servo motor driven roller conveys sheets, offering precise sheet feeding and adjustable feeding speed;
-
2．Independent temperature control and PLC control;
-
3．Multi laying rollers with adjustable pressure ensure optimal laying result;
-
4．Pressure and temperature of each laying roller are individually controlled;
Technical Parameters
-
Power supply
AC 380V/50 HZ
Format
Max Sheet Width 580mm
Total power
10KW
Control
PLC control + servo system+camera system
Air source
6 kg/cm2
Operators
1
Air consumption
Approx. 80L/min
Dimension
L3300*W1400*H1950MM
Laying accuracy
±0.10mm
Product thickness
0.2mm~1.0mm
Temperature control accuracy
±2℃
Temperature control range
0~400℃
Magnetic tape width
6.35mm/8.4mm/12.7mm
Quantity of magnetic tapes
3~10
Applicable materials
Paper card, PVC, ABS, PET, PVC/ABS composite materials, etc.
Productivity
300~600 Sheet/H
Power supply |
AC 380V/50 HZ |
Format |
Max Sheet Width 580mm |
Total power |
10KW |
Control |
PLC control + servo system+camera system |
Air source |
6 kg/cm2 |
Operators |
1 |
Air consumption |
Approx. 80L/min |
Dimension |
L3300*W1400*H1950MM |
Laying accuracy |
±0.10mm |
Product thickness |
0.2mm~1.0mm |
Temperature control accuracy |
±2℃ |
Temperature control range |
0~400℃ |
Magnetic tape width |
6.35mm/8.4mm/12.7mm |
Quantity of magnetic tapes |
3~10 |
Applicable materials |
Paper card, PVC, ABS, PET, PVC/ABS composite materials, etc. |
Productivity |
300~600 Sheet/H |
The machine automatically lays rolls of magnetic tapes onto overlay material. Using heat and pressure, the magnetic tape is bonded to the overlay material, while the backing foil is rewound to a single rewind stand after the laying process. The machine can be built to operate for roll to roll or roll to sheet application. When operating roll to roll, the overlay is rewound after the tape is laid. When operating roll to sheet, after the tape is laid, the material is cut to the desired length with a guillotine. The material thickness of roll overlay material can range from 0.2~1.0mm.